BUSINESS MACHINES

Andromeda Research has been a supplier of programming equipment for business machine maintenance and support for more than a decade. The EPROM+ package provides a proven solution to address the needs of business machine technicians who must support a wide variety of copy and fax machines. The system is capable of supporting all standard eproms plus offers specific options for SHARP and CANON flash roms. The EPROM+ is extremely easy to use and allows you to download machine updates from a manufacturer's website (such as SharpNet) and directly program your part. If you are new to programming your own eproms, we offer a list of suggested equipment based on our experience supplying business machine dealers. Below is a list of the items we recommend to address your needs based on machine manufacturers you support. (Comments from business machine customers)

CANON SHARP TOSHIBA MINOLTA MITA, RICOH, HITACHI


CANON COPIER KIT
The Canon copier kit offers support for the flash roms used in many Canon copiers. The kit offers two adapters depending on the machines you support. The ACDM72A adapter allows you to work with the most recent machines, including the Image Runner, while the AC8B72 adds support earlier generations of Canon flash roms. Regardless of whether you need one or both adapters, the Canon kit allows you to perform any operation you choose on these unique parts including:
1.) You may take a corrupt flash rom, erase it and then reprogram it with data from a working part.
2.) You may use an existing flash rom as a master and transfer the data into another flash rom.
3.) You may take any existing flash rom and save the contents to a disk file
.
This disk file can then be used as a source to create duplicate or replacement parts. With this capability you do not need to use a copy machine as a programmer or purchase new flash roms if existing parts are available. Simply read the data from a new part then program a part you already have. All adapters include specific instructions on how to perform reading, programming and saving operations. The Canon kit includes software specific to Canon copiers. This software release simplifies system operation as it is designed specifically to address Canon flash rom parts. Both the Canon software and standard EPROM+ software are included on Bootable CD with the kit.
From the table below you may select the items you require to build your Canon Kit.
EPROM+ PROGRAMMING SYSTEM
(#AR-32A)
The EPROM+ programming is the basic instrument on which all reading and programming operations are performed. The EPROM+ is required unless you select the EPROM FIELD KIT.
5 VOLT CANON FLASH ROMS
(Requires #AC8B72 adapter)
5 Volt Canon flash roms were the first generation parts used in earlier families of Canon copy machines. You can identify a 5 volt flash by the part numbers printed directly on the chip (photo). Part numbers supported by this adapter are the 29F040, 29F080 and 29F016. Flash roms are erased electrically and do not require the D_ERASE eprom eraser or EPROM field kit.
LOW VOLTAGE CANON FLASH ROMS
(Requires #ACDM72A adapter)
Low voltage Canon flash roms are found in the most recent copy machines including the Image Runner. These flash roms can be identified by the part numbers printed directly on the chip (photo). Part numbers supported by this adapter are the 29LV400, 29W400, 29LV800, 29W800, 29LV160, 29W160, 29LV320 and 29W320. Low voltage flash roms are erased electrically and do not require the D_ERASE eprom eraser or EPROM field kit.


SHARP COPIER KIT
The Sharp copier kit is a customizable solution for technicians and field service personel. From the items listed below choose the specific options which address the type of machines you must support. You may choose to support products with the latest flash roms or also include older copy and fax machines with UV eproms. Simply select the items you wish to include in your kit. The system also supports the flash roms used in the color digital copiers including the OPE, PCU, ICU and Print Controller assemblies. This allows you to update flash roms without using a copy machine as a programmer plus you may reprogram existing or corrupt flash roms. All adapters include specific instructions on how to perform reading and programming operations. Both the EPROM field kit and EPROM+ system include the latest release of software on Bootable CD.
EPROM FIELD KIT
(#EFK-1)
The EPROM field kit is based on the proven programming assembly used in the AR-32A programming unit. The unique feature of the field kit is that the package includes the D_ERASE eprom eraser which is powered by the programming unit and stores in the field kit case. The field kit is only required if you will be working with UV eraseable eproms.
EPROM+ PROGRAMMING SYSTEM
(#AR-32A)
The EPROM+ programming is the basic instrument on which all reading and programming operations are performed. The EPROM+ is required unless you select the EPROM FIELD KIT.
EPROM ERASER
(#D_ERASE)
The D-ERASE eprom eraser is required if you will be working with UV erasable eproms and do not purchase the EPROM field kit.
40 PIN UV EPROM
(Requires #A40PE adapter)
40 pin eproms are used in older business and copy machines and must be erased with an eprom eraser before reprogramming. Choose the EPROM Field kit or EPROM+ with the D_ERASE eprom eraser.
42 PIN UV EPROM
(Requires #A42PE adapter)
42 pin eproms are large capacity UV parts and must be erased with an eprom eraser before reprogramming. Choose the EPROM Field kit or EPROM+ with D_ERASE eprom eraser.
5 VOLT SHARP FLASH ROMS
(Requires #ASDM72A adapter)
5 Volt Sharp flash roms were the first generation parts used in the BEAR (C150/160/250/270) and COUGAR (280/285/287/335/337/507) copy machines. Flash roms are erased electrically and do not require the D_ERASE eprom eraser or EPROM field kit.
LOW VOLTAGE SHARP FLASH ROMS
(Requires #ASDM72B adapter)
Low voltage Sharp flash roms are found in the most recent copy machines including the TIGER (350/450), WHALE (C260) and DRAGON (550/620). Low voltage flash roms are not compatible with the 5 volt parts and require a different adapter. Low voltage flash roms are erased electrically and do not require the D_ERASE eprom eraser or EPROM field kit.


TOSHIBA COPIER KIT
The Toshiba copier kit addresses the needs of technicians and field service personel who must update copier firmware in your shop or at a customers site. From the items listed below, choose the specific options which address the eprom types used in the machines you must support. You may choose to support products with the latest 42 pin UV eproms or select just a basic field instrument. Simply select the items you wish to include in your kit. All adapters include specific instructions on how to perform reading and programming operations. Both the EPROM field kit and EPROM+ system include the latest release of software on Bootable CD.
EPROM FIELD KIT
(#EFK-1)
The EPROM field kit is based on the proven programming assembly used in the AR-32A programming unit. The unique feature of the field kit is that the package includes the D_ERASE eprom eraser which is powered by the programming unit and stores in the field kit case. The field kit is only required if you will be working with UV eraseable eproms.
EPROM+ PROGRAMMING SYSTEM
(#AR-32A)
The EPROM+ programming is the basic instrument on which all reading and programming operations are performed. The EPROM+ is required unless you select the EPROM FIELD KIT.
EPROM ERASER
(#D_ERASE)
The D-ERASE eprom eraser is required if you will be working with UV erasable eproms and do not purchase the EPROM field kit.
40 PIN UV EPROM
(Requires #A40PE adapter)
40 pin eproms are used in older business and copy machines and must be erased with an eprom eraser before reprogramming. Choose the EPROM Field kit or EPROM+ with the D_ERASE eprom eraser.
42 PIN UV EPROM
(Requires #A42PE adapter)
42 pin eproms are large capacity UV parts and must be erased with an eprom eraser before reprogramming. Choose the EPROM Field kit or EPROM+ with D_ERASE eprom eraser.


MINOLTA COPIER KIT
The Minolta copier kit addresses the needs of technicians and field service personel who must update copier firmware in your shop or at a customers site. From the items listed below, choose the specific options which address the eprom types used in the machines you must support. You may choose to support products with the latest 40 pin UV eproms or select just a basic field instrument. Simply select the items you wish to include in your kit. All adapters include specific instructions on how to perform reading and programming operations. Both the EPROM field kit and EPROM+ system include the latest release of software on Bootable CD.
EPROM FIELD KIT
(#EFK-1)
The EPROM field kit is based on the proven programming assembly used in the AR-32A programming unit. The unique feature of the field kit is that the package includes the D_ERASE eprom eraser which is powered by the programming unit and stores in the field kit case. The field kit is only required if you will be working with UV eraseable eproms.
EPROM+ PROGRAMMING SYSTEM
(#AR-32A)
The EPROM+ programming is the basic instrument on which all reading and programming operations are performed. The EPROM+ is required unless you select the EPROM FIELD KIT.
EPROM ERASER
(#D_ERASE)
The D-ERASE eprom eraser is required if you will be working with UV erasable eproms and do not purchase the EPROM field kit.
40 PIN UV EPROM
(Requires #A40PE adapter)
40 pin eproms are used in older business and copy machines and must be erased with an eprom eraser before reprogramming. Choose the EPROM Field kit or EPROM+ with the D_ERASE eprom eraser.


MITA, RICOH and HITACHI COPIER KITS
These copier kits addresses the needs of technicians and field service personel who must update copier firmware in your shop or at a customers site. From the items listed below, choose the specific options which address your needs for the machines you must support. You may choose the EPROM field kit or just a basic EPROM+ instrument. Simply select the items you wish to include. Both the EPROM field kit and EPROM+ system include the latest release of software on Bootable CD.
EPROM FIELD KIT
(#EFK-1)
The EPROM field kit is based on the proven programming assembly used in the AR-32A programming unit. The unique feature of the field kit is that the package includes the D_ERASE eprom eraser which is powered by the programming unit and stores in the field kit case. The field kit is only required if you will be working with UV eraseable eproms.
EPROM+ PROGRAMMING SYSTEM
(#AR-32A)
The EPROM+ programming is the basic instrument on which all reading and programming operations are performed. The EPROM+ is required unless you select the EPROM FIELD KIT.
EPROM ERASER
(#D_ERASE)
The D-ERASE eprom eraser is required if you will be working with UV erasable eproms and do not purchase the EPROM field kit.


OTHERS

There are many additional business products which contain eproms. The EPROM+ system supports all standard eprom and flash eprom devices. If you encounter a product not listed or are uncertain about support requirements please contact us for assistance.

BACK TO APPLICATION LIST | BACK TO HOMEPAGE